Module CH2STAT_SET

DCP channel 2 status register

Modules

• ERROR_CODE
  Indicates additional error codes for some of the error conditions.
• ERROR_DST
  This bit indicates that a bus error occurred when storing to the destination buffer
• ERROR_PACKET
  This bit indicates that a bus error occurred when reading the packet or payload, or when writing the status back to the packet paylaod
• ERROR_PAGEFAULT
  This bit indicates that a page fault occurred while converting a virtual address to a physical address
• ERROR_SETUP
  This bit indicates that the hardware detected an invalid programming configuration (such as a buffer length that is not a multiple of the natural data size for the operation)
• ERROR_SRC
  This bit indicates that a bus error occurred when reading from the source buffer
• HASH_MISMATCH
  This bit indicates that a hashing check operation is mismatched for the control packets that enable the HASH_CHECK bit
• TAG
  Indicates the tag from the last completed packet in the command structure.