Module CTRL_CLR

Source
Expand description

Control Register 0

Modulesยง

BLOCK_SIZE
Select the block size to process.
CLKGATE
This bit must be set to zero for normal operation
ENABLE
Enables PXP operation with specified parameters
ENABLE_LCD_HANDSHAKE
Enable handshake with LCD controller
EN_REPEAT
Enable the PXP to run continuously
HFLIP
Indicates that the output buffer should be flipped horizontally (effect applied before rotation).
IRQ_ENABLE
Interrupt enable
NEXT_IRQ_ENABLE
Next command interrupt enable
ROTATE
Indicates the clockwise rotation to be applied at the output buffer
ROT_POS
This bit controls where rotation will occur in the PXP datapath
SFTRST
Set this bit to zero to enable normal PXP operation
VFLIP
Indicates that the output buffer should be flipped vertically (effect applied before rotation).