Module imxrt_ral::pxp::CTRL_SET

Control Register 0

Modules

• BLOCK_SIZE
  Select the block size to process.
• CLKGATE
  This bit must be set to zero for normal operation
• ENABLE
  Enables PXP operation with specified parameters
• ENABLE_LCD_HANDSHAKE
  Enable handshake with LCD controller
• EN_REPEAT
  Enable the PXP to run continuously
• HFLIP
  Indicates that the output buffer should be flipped horizontally (effect applied before rotation).
• IRQ_ENABLE
  Interrupt enable
• NEXT_IRQ_ENABLE
  Next command interrupt enable
• ROTATE
  Indicates the clockwise rotation to be applied at the output buffer
• ROT_POS
  This bit controls where rotation will occur in the PXP datapath
• SFTRST
  Set this bit to zero to enable normal PXP operation
• VFLIP
  Indicates that the output buffer should be flipped vertically (effect applied before rotation).