Expand description
Control Register 0
Modulesยง
- BLOCK_
SIZE - Select the block size to process.
- CLKGATE
- This bit must be set to zero for normal operation
- ENABLE
- Enables PXP operation with specified parameters
- ENABLE_
LCD_ HANDSHAKE - Enable handshake with LCD controller
- EN_
REPEAT - Enable the PXP to run continuously
- HFLIP
- Indicates that the output buffer should be flipped horizontally (effect applied before rotation).
- IRQ_
ENABLE - Interrupt enable
- NEXT_
IRQ_ ENABLE - Next command interrupt enable
- ROTATE
- Indicates the clockwise rotation to be applied at the output buffer
- ROT_POS
- This bit controls where rotation will occur in the PXP datapath
- SFTRST
- Set this bit to zero to enable normal PXP operation
- VFLIP
- Indicates that the output buffer should be flipped vertically (effect applied before rotation).