Module OSC_CONFIG0_TOG

XTAL OSC Configuration 0 Register

Modules

• BYPASS
  Bypasses any calculated RC tuning value and uses the programmed register value.
• ENABLE
  Enables the tuning logic to calculate new RC tuning values
• HYST_MINUS
  Negative hysteresis value
• HYST_PLUS
  Positive hysteresis value
• INVERT
  Invert the stepping of the calculated RC tuning value.
• RC_OSC_PROG
  RC osc. tuning values.
• RC_OSC_PROG_CUR
  The current tuning value in use.
• START
  Start/stop bit for the RC tuning calculation logic. If stopped the tuning logic is reset.