imxrt_ral/blocks/imxrt1011/
rtwdog.rs#[doc = "WDOG"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "Watchdog Control and Status Register"]
pub CS: crate::RWRegister<u32>,
#[doc = "Watchdog Counter Register"]
pub CNT: crate::RWRegister<u32>,
#[doc = "Watchdog Timeout Value Register"]
pub TOVAL: crate::RWRegister<u32>,
#[doc = "Watchdog Window Register"]
pub WIN: crate::RWRegister<u32>,
}
#[doc = "Watchdog Control and Status Register"]
pub mod CS {
#[doc = "Stop Enable"]
pub mod STOP {
pub const offset: u32 = 0;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Watchdog disabled in chip stop mode."]
pub const STOP_0: u32 = 0;
#[doc = "Watchdog enabled in chip stop mode."]
pub const STOP_1: u32 = 0x01;
}
}
#[doc = "Wait Enable"]
pub mod WAIT {
pub const offset: u32 = 1;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Watchdog disabled in chip wait mode."]
pub const WAIT_0: u32 = 0;
#[doc = "Watchdog enabled in chip wait mode."]
pub const WAIT_1: u32 = 0x01;
}
}
#[doc = "Debug Enable"]
pub mod DBG {
pub const offset: u32 = 2;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Watchdog disabled in chip debug mode."]
pub const DBG_0: u32 = 0;
#[doc = "Watchdog enabled in chip debug mode."]
pub const DBG_1: u32 = 0x01;
}
}
#[doc = "Watchdog Test"]
pub mod TST {
pub const offset: u32 = 3;
pub const mask: u32 = 0x03 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Watchdog test mode disabled."]
pub const TST_0: u32 = 0;
#[doc = "Watchdog user mode enabled. (Watchdog test mode disabled.) After testing the watchdog, software should use this setting to indicate that the watchdog is functioning normally in user mode."]
pub const TST_1: u32 = 0x01;
#[doc = "Watchdog test mode enabled, only the low byte is used. CNT\\[CNTLOW\\] is compared with TOVAL\\[TOVALLOW\\]."]
pub const TST_2: u32 = 0x02;
#[doc = "Watchdog test mode enabled, only the high byte is used. CNT\\[CNTHIGH\\] is compared with TOVAL\\[TOVALHIGH\\]."]
pub const TST_3: u32 = 0x03;
}
}
#[doc = "Allow updates"]
pub mod UPDATE {
pub const offset: u32 = 5;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Updates not allowed. After the initial configuration, the watchdog cannot be later modified without forcing a reset."]
pub const UPDATE_0: u32 = 0;
#[doc = "Updates allowed. Software can modify the watchdog configuration registers within 128 bus clocks after performing the unlock write sequence."]
pub const UPDATE_1: u32 = 0x01;
}
}
#[doc = "Watchdog Interrupt"]
pub mod INT {
pub const offset: u32 = 6;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Watchdog interrupts are disabled. Watchdog resets are not delayed."]
pub const INT_0: u32 = 0;
#[doc = "Watchdog interrupts are enabled. Watchdog resets are delayed by 128 bus clocks from the interrupt vector fetch."]
pub const INT_1: u32 = 0x01;
}
}
#[doc = "Watchdog Enable"]
pub mod EN {
pub const offset: u32 = 7;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Watchdog disabled."]
pub const EN_0: u32 = 0;
#[doc = "Watchdog enabled."]
pub const EN_1: u32 = 0x01;
}
}
#[doc = "Watchdog Clock"]
pub mod CLK {
pub const offset: u32 = 8;
pub const mask: u32 = 0x03 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Bus clock"]
pub const CLK_0: u32 = 0;
#[doc = "LPO clock"]
pub const CLK_1: u32 = 0x01;
#[doc = "INTCLK (internal clock)"]
pub const CLK_2: u32 = 0x02;
#[doc = "ERCLK (external reference clock)"]
pub const CLK_3: u32 = 0x03;
}
}
#[doc = "Reconfiguration Success"]
pub mod RCS {
pub const offset: u32 = 10;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Reconfiguring WDOG."]
pub const RCS_0: u32 = 0;
#[doc = "Reconfiguration is successful."]
pub const RCS_1: u32 = 0x01;
}
}
#[doc = "Unlock status"]
pub mod ULK {
pub const offset: u32 = 11;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "WDOG is locked."]
pub const ULK_0: u32 = 0;
#[doc = "WDOG is unlocked."]
pub const ULK_1: u32 = 0x01;
}
}
#[doc = "Watchdog prescaler"]
pub mod PRES {
pub const offset: u32 = 12;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "256 prescaler disabled."]
pub const PRES_0: u32 = 0;
#[doc = "256 prescaler enabled."]
pub const PRES_1: u32 = 0x01;
}
}
#[doc = "Enables or disables WDOG support for 32-bit (otherwise 16-bit or 8-bit) refresh/unlock command write words"]
pub mod CMD32EN {
pub const offset: u32 = 13;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Disables support for 32-bit refresh/unlock command write words. Only 16-bit or 8-bit is supported."]
pub const CMD32EN_0: u32 = 0;
#[doc = "Enables support for 32-bit refresh/unlock command write words. 16-bit or 8-bit is NOT supported."]
pub const CMD32EN_1: u32 = 0x01;
}
}
#[doc = "Watchdog Interrupt Flag"]
pub mod FLG {
pub const offset: u32 = 14;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "No interrupt occurred."]
pub const FLG_0: u32 = 0;
#[doc = "An interrupt occurred."]
pub const FLG_1: u32 = 0x01;
}
}
#[doc = "Watchdog Window"]
pub mod WIN {
pub const offset: u32 = 15;
pub const mask: u32 = 0x01 << offset;
pub mod R {}
pub mod W {}
pub mod RW {
#[doc = "Window mode disabled."]
pub const WIN_0: u32 = 0;
#[doc = "Window mode enabled."]
pub const WIN_1: u32 = 0x01;
}
}
}
#[doc = "Watchdog Counter Register"]
pub mod CNT {
#[doc = "Low byte of the Watchdog Counter"]
pub mod CNTLOW {
pub const offset: u32 = 0;
pub const mask: u32 = 0xff << offset;
pub mod R {}
pub mod W {}
pub mod RW {}
}
#[doc = "High byte of the Watchdog Counter"]
pub mod CNTHIGH {
pub const offset: u32 = 8;
pub const mask: u32 = 0xff << offset;
pub mod R {}
pub mod W {}
pub mod RW {}
}
}
#[doc = "Watchdog Timeout Value Register"]
pub mod TOVAL {
#[doc = "Low byte of the timeout value"]
pub mod TOVALLOW {
pub const offset: u32 = 0;
pub const mask: u32 = 0xff << offset;
pub mod R {}
pub mod W {}
pub mod RW {}
}
#[doc = "High byte of the timeout value"]
pub mod TOVALHIGH {
pub const offset: u32 = 8;
pub const mask: u32 = 0xff << offset;
pub mod R {}
pub mod W {}
pub mod RW {}
}
}
#[doc = "Watchdog Window Register"]
pub mod WIN {
#[doc = "Low byte of Watchdog Window"]
pub mod WINLOW {
pub const offset: u32 = 0;
pub const mask: u32 = 0xff << offset;
pub mod R {}
pub mod W {}
pub mod RW {}
}
#[doc = "High byte of Watchdog Window"]
pub mod WINHIGH {
pub const offset: u32 = 8;
pub const mask: u32 = 0xff << offset;
pub mod R {}
pub mod W {}
pub mod RW {}
}
}