Module REG_1P1

Regulator 1P1 Register

Modules

• BO_OFFSET
  Control bits to adjust the regulator brownout offset voltage in 25mV steps
• BO_VDD1P1
  Status bit that signals when a brownout is detected on the regulator output.
• ENABLE_BO
  Control bit to enable the brownout circuitry in the regulator.
• ENABLE_ILIMIT
  Control bit to enable the current-limit circuitry in the regulator.
• ENABLE_LINREG
  Control bit to enable the regulator output.
• ENABLE_PULLDOWN
  Control bit to enable the pull-down circuitry in the regulator
• ENABLE_WEAK_LINREG
  Enables the weak 1p1 regulator
• OK_VDD1P1
  Status bit that signals when the regulator output is ok. 1 = regulator output > brownout target
• OUTPUT_TRG
  Control bits to adjust the regulator output voltage
• SELREF_WEAK_LINREG
  Selects the source for the reference voltage of the weak 1p1 regulator.