Module REG_3P0_CLR

Regulator 3P0 Register

Modules

• BO_OFFSET
  Control bits to adjust the regulator brownout offset voltage in 25mV steps
• BO_VDD3P0
  Status bit that signals when a brownout is detected on the regulator output.
• ENABLE_BO
  Control bit to enable the brownout circuitry in the regulator.
• ENABLE_ILIMIT
  Control bit to enable the current-limit circuitry in the regulator.
• ENABLE_LINREG
  Control bit to enable the regulator output to be set by the programmed target voltage setting and internal bandgap reference
• OK_VDD3P0
  Status bit that signals when the regulator output is ok. 1 = regulator output > brownout target
• OUTPUT_TRG
  Control bits to adjust the regulator output voltage
• VBUS_SEL
  Select input voltage source for LDO_3P0 from either USB_OTG1_VBUS or USB_OTG2_VBUS