imxrt_ral::pwm::sm::SMCAPTCTRLA::INP_SELA

Module RW

source

Constantsยง

  • INP_SELA_0
    Raw PWM_A input signal selected as source.
  • INP_SELA_1
    Output of edge counter/compare selected as source. Note that when this bitfield is set to 1, the internal edge counter is enabled and the rising and/or falling edges specified by the CAPTCTRLA[EDGA0] and CAPTCTRLA[EDGA1] fields are ignored. The software must still place a value other than 00 in either or both of the CAPTCTLRA[EDGA0] and/or CAPTCTRLA[EDGA1] fields in order to enable one or both of the capture registers.