No operation
Count rising edges of primary sourceRising edges are counted only when SCTRL[IPS] = 0. Falling edges are counted when SCTRL[IPS] = 1. If the primary count source is IP bus clock divide by 1, only rising edges are counted regardless of the value of SCTRL[IPS].
Count rising and falling edges of primary sourceIP bus clock divide by 1 cannot be used as a primary count source in edge count mode.
Count rising edges of primary source while secondary input high active
Quadrature count mode, uses primary and secondary sources
Count rising edges of primary source; secondary source specifies directionRising edges are counted only when SCTRL[IPS] = 0. Falling edges are counted when SCTRL[IPS] = 1.
Edge of secondary source triggers primary count until compare
Cascaded counter mode (up/down)The primary count source must be set to one of the counter outputs.